DCImanager 6
Documentation
/
DCImanager 6
/
About platform
/
Supported devices

Supported devices

DCImanager 6 supports management of the following types of equipment:

  • servers;
  • switches;
  • power distributors (PDU);
  • uninterruptible power supplies (UPS);
  • BMC;
  • Intel AMT.

DCImanager 6 uses special modules called handlers to manage the equipment. The article contains information about available handlers and their compatibility with specific models of equipment.

Note
  1. Handlers described below may operate incorrectly with particular devices. The platform has been tested on equipment from the Tested on devices column. This hardware is suitable for connecting to the platform, but some of the device's functions may not be supported.
  2. The device lists specify only the equipment with which the platform has been tested. The full list of supported devices is not limited to the equipment from the lists.

Servers

The platform does not use special handlers to manage servers.

Motherboards models

DCImanager 6 has been tested on servers with the following motherboards:

List of motherboards

Server models

Each server model can correspond to more than one type of platform.

DCImanager 6 has been tested on the following server models:

List of servers

Switches

DCImanager 6 has been tested on switches: 

List of switches
Note
If there is no special handler for the SNMP managed switch, check its operation with the Common (SNMP) handler. If the device does not work properly with this handler, you can send requests for support for your equipment through your ISPsystem client area or the features.ispsystem.com service.
HandlerTested on devicesInformation

Protocols used

Common (SNMP)Brocade FGS648P-POE
Brocade FGS648P
Cisco Catalyst WS-C3560E-24TD (SW Version: 12.2(58)SE1)
Cisco Catalyst 2960
Cisco CBS250-24T-4G
Cisco C2350
Cisco C2960
Cisco C2960S
Cisco C3560
Cisco C3560E
Cisco C3750
Cisco CBS31X0
Eltex MES2324B		Suitable for most switches that support SNMP management. We recommend using it if there is no special handler for the switch.
SNMPv1/v2c/v3
Arista (eAPI)Arista DCS-7010T-48-R (Software image version: 4.21.10M-INT)Suitable for use with some Arista switches. Enable eAPI in the switch settings for connection.eAPI
Brocade FCX beta (SNMP)—Suitable for some Brocade FCX switches. SNMPv1/v2c/v3
Cisco Catalyst (SNMP)Cisco Catalyst WS-C3560E-24TD (SW Version: 12.2(58)SE1)
Cisco Catalyst WS-C3850-24T
Cisco Catalyst WS-C2960L-24TS-LL
Cisco Catalyst 2960
Cisco CBS250-24T-4G
Cisco C2350
Cisco C2960
Cisco C2960S
Cisco C3560
Cisco C3560E
Cisco C3750
Cisco CBS31X0		Suitable for some Cisco switches running on Catalyst OS.SNMPv1/v2c/v3
Cisco Catalyst 45xx (SNMP)Cisco Catalyst WS-C4948E-SSuitable for some Cisco Catalyst 45xx and Cisco Catalyst 49xx switches.SNMPv1/v2c/v3
Cisco Nexus (NX-API) Cisco Nexus 5000 Switch (System version: 7.1(1)N1(1))Suitable for some Cisco Nexus Series switches. Most operations are performed via NxAPI. Enable NxAPI access in the switch settings.NxAPI
Cisco Small Business beta (SNMP)
—For Cisco Small Business family.SNMPv1/v2c/v3
D-Link (SNMP)D-Link DGS-3100-24
D-Link DGS-3120-24
D-Link DGS-1210-28
D-Link DGS-1210-28/ME/A2		Suitable for some D-Link switches.SNMPv1/v2c/v3
D-Link 3200B beta (SNMP)

—

Suitable for some D-Link 3200B switches.SNMPv1/v2c/v3
D-Link 3200C  beta (SNMP)

—

Suitable for some D-Link 3200C switches.SNMPv1/v2c/v3
Dell (SNMP)Dell Force-10 (Series: s60)
Dell PowerConnect 5548		Suitable for some Dell switches.SNMPv1/v2c/v3
Eltex MES2XXX beta (SNMP)—Suitable for Eltex with the version MES2000.SNMPv1/v2c/v3
Eltex MES5XXX beta (SNMP)—Suitable for Eltex with the version MES5000.SNMPv1/v2c/v3
Extreme Network EXOS (SOAP HTTP)Extreme Network Summit X670Suitable for some Extreme Network switches.SOAP HTTP
HP (SNMP)HP ProCurve 2510G-48
HP 2910al-48G
HP 2920-48G
HP J9728A 2920-48G		Suitable for some HP switches.SNMPv1/v2c/v3
Huawei (SNMP)Huawei S5735-L48T4X-ASuitable for some Huawei switches.SNMPv1/v2c/v3
Juniper (NetConf)
Juniper EX2200-48T-4G (Junos: 15.1R6.7)Suitable for some Juniper switches.NetConf, SSH
Juniper ELS (NetConf)Juniper EX4300-48P (Junos: 18.4R2.7)
Juniper EX3400-48T (Junos: 15.1X53-D591.1)
Juniper EX4300-48MP (Junos: 18.2R2.6)		Suitable for some Juniper switches with ELS support .NetConf, SSH
Juniper Junos 12 (NetConf)Model: EX4200-48PX (Junos: 12.3R12-S12)Suitable for some Juniper switches with OS Junos 12.X.NetConf, SSH
MikroTik (RouterOS API)Mikrotik CRS3XX
Mikrotik CRS317-1G-16S		Suitable for some Mikrotik CRS3XX switches.RouterOS API
Zyxel GS2200 beta (SNMP)—Suitable for Zyxel GS2200 switches.SNMPv1/v2c
Zyxel XGS L3 Switch beta (SNMP)—Suitable for Zyxel XGS switches.SNMPv1/v2c

PDU

HandlerTested on devicesInformation

Protocols used

APC PDU (SNMP)APC AP7822
APC AP7920
APC AP7921
APC AP7922
APC AP7941
APC AP7950
APC AP7951
APC AP7952
APC AP7953
APC AP8453
APC AP8653
APC AP8865
APC AP8941
APC AP8953
APC AP8959
APC AP8959EU3
APC AP8981
APC APDU9941		Suitable for use with some APC PDUs.
SNMPv1/v2c/v3
Aten PDU (SNMP)Aten PE8324GSuitable for use with some Aten PDUs.SNMPv1/v2c/v3
ATS PDU (SNMP)PDU15SWHVIEC12ATNETSuitable for use with some ATS PDUs.
SNMPv1/v2c/v3
C3 Solutions PDU (SNMP)

—

Suitable for use with some C3 Solutions PDUs.SNMPv1/v2c/v3
RPCM PDU (SNMP)RPCM 1502 (Software version: 0.9.34)Suitable for use with some RPCM PDUs.
SNMPv1/v2c/v3

UPS

HandlerInformation

Protocols used

Emerson Liebert NX (SNMP)Suitable for use with some APC UPS.
SNMPv1/v2c/v3
APC UPS beta (SNMP)Suitable for use with some ATS UPS.
SNMPv1/v2c/v3
KEOR MOD 250 (SNMP - CS141)

ПSuitable for use with some Legrand Keor MOD UPS. Tested on the device Legrand Keor MOD 250 with CS141 SNMP module.

SNMPv1/v2c/v3

BMC

HandlerInformationProtocols used
IPMI v1.5/v2Suitable for IPMI devices that use the IPMI v1.5/v2.0 protocol.IPMI v1.5/v2.0
IPMI v2 (lanplus)Suitable for IPMI devices that use IPMI v2.0 (lanplus) protocol.IPMI v2.0 (lanplus)
Redfish

Suitable for working via the Redfish protocol on servers:

  • Delta Solutions (tested on DSTPS2S167);
  • GAGAR>N (tested on Orakul Gen1);
  • HP, HPE (tested on HPE ProLiant DL380, HP BL460 Gen10, HP Gen9, HPE ProLiant DL360 Gen10, HPE Synergy 480 Gen 10, HPE Apollo 4200 Gen10);
  • VEGMAN
Redfish

Connection to the BMC web interface is supported for most equipment manufacturers; connection to the BMC console — for some models of equipment:

  • Aquarius;
  • ASRockRack;
  • Asus;
  • Cisco;
  • Dell iDRAC 6;
  • Dell iDRAC 8;
  • Dell iDRAC 9;
  • GAGAR>N;
  • HP Gen8;
  • HP iLO3;
  • HP iLO4;
  • HP iLO5;
  • Intel BMC;
  • Supermicro;
  • Supermicro X8;
  • Supermicro X9;
  • Supermicro X11.
Connection to the console is only supported via IPMI protocols.

Intel AMT

HandlerInformationProtocol used
Intel AMTSuitable for Intel AMT devices that use the WS-Management (WS-Man) protocol.WS-Management




Related topics